Differences

This shows you the differences between two versions of the page.

--- setups:setup_installation_guides:eye_tracker [2015/12/08 09:38] – lukas.schneider
+++ setups:setup_installation_guides:eye_tracker [2022/12/29 07:15] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-How to install view point and add the ethernet connection via a different port
+====== Eye tracker setup ======
-)Ignore instructions of not connecting the eye tracker before driver installation
+===== How to install view point and add the ethernet connection via a different port =====
-)Plug camera to USB3 port
+  - Ignore instructions of not connecting the eye tracker before driver installation
+  - Plug camera to USB3 port
-)Run CD/driver/usb-220/win64
+  - Run <file>CD/driver/usb-220/win64</file>
+  - Copy the viewpoint folder
-)Copy the viewpoint folder
+  - If your eye tracker is not detected, update the driver for the device in the device manager
+  - Maybe your internet boards get screwed up during this process. Remove the uEye Service from the Network connection that you are using for the Internet connection. You don't need uEye service anyway.
-)If your eye tracker is not detected, update the driver for the device in the device manager
+  - Change the TCP/IP PIv4 settings of the connection that uses the second board (connecting  the two computers): server and client of one computer should be client and server of the other. For example on the eyetracker: IPaddress=192.168.1.2, Standardgateway=192.168.1.1; on the behavioural client: IPaddress=192.168.1.1, Standardgateway=192.168.1.2
+  - Address the correct board by typing the command <code> ethernet_setIPAddress 192.168.1.2 </code> in viewpoint software command line on your eye tracker computer. You will have to  enable the command line window in the tab windows/command line
-)Maybe your internet boards get screwed up during this process.
+  - Also copy the viewpoint folder to the client, start <file> ViewpointClient.exe </file>
-Remove the uEye Service from the Network connection that you are using for the Internet connection.
+  - Allow access on the eyetracker side (firewall window pops up)
-You don't need uEye service anyway
+  - If you do not get any packages even though everything seems properly connected (no error), make sure you are using the <file>VPX_InterApp.dll</file> version which has been last updated in Nov. 2011 (from ViewPoint version 2.8.6.21), and not the one from July 2011 (v 2.9.2.5)
+  - Modify <file> viewpointinitialize.m </file> (need to add the correct paths)
-)Change the TCP/IP settings of the connection that uses the second board (connecting  the two computers): server and client of one computer should be client and server of the other…
-)Address the correct board by typing the command
-setIPAddress 192.168.0.1
-in viewpoint software command line on your eye tracker computer. You will have to  enable the command line window in the tab windows/command line
-)If you do not get any packages, do WHAT??
-)Modify viewpointinitialize.m (need to add the correct paths)